DESCRIPTION
In most Arduino projects, relays are the first choice to drive some large current device. It requires a certain amount of current to drive the internal coil to pick-up contact. But for some MCU, like Intel Edison, Intel joule, lilypad, Raspberry Pi and other microcontroller with limited amount of current GPIO, it’s hard to drive one or more relays simultaneously.
The MOSFET power controller is a module which can drive a large current device with limited current GPIO. It works as a MOSFET relay or MOSFET driver. When you give it a digital high-level signal (3.3~10V), MOSFET turns on, vice versa.
Compared to the relay module, MOSFET power controller is compatible with Arduino, Raspberry Pi, Lattepanda and other Microcontroller, supports 3.3~10V logic power control. The VIN port supports 5~36V; 0~20A power input, if the current is over 10A, we recommend an external heat sink. And MOSFET supports quick ON-OFF switching frequency from 0~20KHz. That is a good point for robot control.
Note: It works with direct current (DC) only!
TECHNICAL DETAILS
- Operating Voltage: 5 - 36V DC
- Rated Current: Continuous current 15A at room temperature
- Peak Current: 30A
- Logic Control Signal: 3.3 - 20V
- Supported Switching Frequency: 0 - 20KHz
- Operating Temperature: -40°C to 85°C
- Dimensions: 34mm * 17mm * 12mm
SHIPPING LIST
- 1x MOSFET Driver Module