nRF24L01+PA+LNA Transceiver Wireless Module 2.4GHz 1000m Range

DESCRIPTION

NRF24L01+ is a single chip transceiver working in the 2.4-2.5GHz general-purpose ISM band. Wireless transceiver includes: Frequency generator enhanced ShockBurst mode, controller power amplifier, crystal amplifier, modulator demodulator, output power channel selection and protocol set through the SPI interface. Low current consumption in power-down mode and standby mode.

Open ISM band, with +20dBm transmit power, license-exempt use. Supports 6 channels of data reception. Range can go up to 1000 meters in the open!

FEATURES

1. High Speed: 2Mbps. As the air transmission time is very short, collision in wireless transmission is greatly reduced.
2. Multi-Frequency Points: 125 frequency points, meeting the needs of multi-point communication and frequency hopping communication.
3. Low Power Consumption: When in response mode communication, fast air transmission and start-up time greatly reduce the current consumption.
4. Low Application Cost: nRF24L01+ integrates all RF protocol high-speed signals processing, such as: automatically retransmission of lost packets and automatically generation of acknowledge signal, etc. The nRF24L01+ SPI interface can be connected using a microcontroller hardware SPI port or microcontroller I/O port for simulation. Internal FIFO can interface with various high and low speed microprocessor. Easy to use low-cost microcontroller.

TECHNICAL DETAILS

• Operating Voltage: 3.3V - 3.6V
• Maximum Power Output: +20dBm
• Peak Data Transfer Rate: 2000kbps
• Current Consumption for Transmitting Mode (peak): 115mA
• Current Consumption in Receiving Mode (peak): 45mA
• Current Consumption in Power Down Mode: 4.2uA
• Temperature Range: -40°C to +85°C
• PA Gain: 20dB
• LNA Gain: 10dB
• LNA Noise Figure: 2.6dB
• Antenna Gain (peak): 2dBi

SHIPPING LIST

• 1x nRF24L01+PA+LNA Transceiver Wireless Module 2.4GHz 1000m Range