DESCRIPTION
NRF24L01+ is a single chip transceiver working in the 2.4-2.5GHz general-purpose ISM band. Wireless transceiver includes: Frequency generator enhanced ShockBurst mode, controller power amplifier, crystal amplifier, modulator demodulator, output power channel selection and protocol set through the SPI interface. Low current consumption in power-down mode and standby mode.
Open ISM band, with +20dBm transmit power, license-exempt use. Supports 6 channels of data reception. Range can go up to 1000 meters in the open!
FEATURES
- High Speed: 2Mbps. As the air transmission time is very short, collision in wireless transmission is greatly reduced.
- Multi-Frequency Points: 125 frequency points, meeting the needs of multi-point communication and frequency hopping communication.
- Low Power Consumption: When in response mode communication, fast air transmission and start-up time greatly reduce the current consumption.
- Low Application Cost: nRF24L01+ integrates all RF protocol high-speed signals processing, such as: automatically retransmission of lost packets and automatically generation of acknowledge signal, etc. The nRF24L01+ SPI interface can be connected using a microcontroller hardware SPI port or microcontroller I/O port for simulation. Internal FIFO can interface with various high and low speed microprocessor. Easy to use low-cost microcontroller.
TECHNICAL DETAILS
- Operating Voltage: 3.3V - 3.6V
- Maximum Power Output: +20dBm
- Peak Data Transfer Rate: 2000kbps
- Current Consumption for Transmitting Mode (peak): 115mA
- Current Consumption in Receiving Mode (peak): 45mA
- Current Consumption in Power Down Mode: 4.2uA
- Temperature Range: -40°C to +85°C
- PA Gain: 20dB
- LNA Gain: 10dB
- LNA Noise Figure: 2.6dB
- Antenna Gain (peak): 2dBi
SHIPPING LIST
- 1x nRF24L01+PA+LNA Transceiver Wireless Module 2.4GHz 1000m Range
>