DESCRIPTION
FOR 180 DEGREES:
This servo motor can rotate approximately 180 degrees (90 in each direction). You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gear box. It works out of the box with the default servo example from Arduino. Included with this motor is a pack of accessories so you can attach the servo to your project.
To control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using the Servo library included with the Arduino IDE. Position "0" (1.5ms pulse) is middle, "90" (~2ms pulse) is all the way to the right, "-90" (~1ms pulse) is all the way to the left.
FOR 360 DEGREES:
This servo motor rotates 360 degrees fully forward or backwards, instead of moving to a single position. You can use any servo code, hardware or library to control these servos. Good for making simple moving robots.
Good for beginners who want to make stuff move without building a motor controller with feedback & gear box. It works out of the box with the default servo example from Arduino. Included with this motor is a pack of accessories so you can attach the servo to your project.
To control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using the Servo library included with the Arduino IDE. Position "90" (1.5ms pulse) is stop, "180" (2ms pulse) is full speed forward, "0" (1ms pulse) is full speed backwards.
TECHNICAL DETAILS
- Input Voltage: 4.8 - 7.2V
- Gear Type: Metal Gear
- Operating Speed: 0.17sec / 60 degrees (4.8V no load)
- Operating Speed: 0.13sec / 60 degrees (6.0V no load)
- Stall Torque: 9.4kgcm (4.8V)
- Stall Torque: 11kgcm (6.0V)
- Operating Temperature: -0°C to 55°C
SHIPPING LIST
- 1x Servo Motor MG996R
- 1x Servo Horn Accessories Pack