DESCRIPTION
The ESP32-S3-DevKitC is an entry-level development board equipped with ESP32-S3-WROOM, a general-purpose Wi-Fi + Bluetooth® LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions.
The ESP32-S3 is a powerful, generic Wi-Fi + Bluetooth LE MCU module that has a rich set of peripherals that comes with a PCB antenna. They provide acceleration for neural network computing and signal processing workloads.
Most of the I/O pins on the module are broken out to the pin headers on both sides of this board for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-S3-DevKitC on a breadboard.
ESP32-S3 has a full-speed USB OTG interface, compliant with the USB 1.1 specification. The interface is used for power supply to the board, for flashing applications to the chip, for communication with the chip using USB 1.1 protocols, as well as for JTAG debugging.
Neopixel on-board is pin 48.
TECHNICAL DETAILS
CPU and On-Chip Memory
- Xtensa® dual-core 32-bit LX7 microprocessor, up to 240 MHz
- CoreMark® score:– 1core at 240 MHz: 613.86 CoreMark; 2.56 CoreMark/MHz Espressif Systems– 2cores at 240 MHz: 1181.60 CoreMark; 4.92 CoreMark/MHz
- 128-bit data bus and SIMD commands
- 384 KBROM
- 512 KBSRAM
- 16KBSRAMinRTC
- SPI, Dual SPI, Quad SPI, Octal SPI, QPI and OPI interfaces that allow connection to multiple flash and external RAM
- Flash controller with cache is supported
- Flash in-Circuit Programming (ICP) is supported
- 8MB embedded flash
- 2MB embedded PSRAM
WiFi
- IEEE 802.11 b/g/n-compliant
- Supports 20 MHz, 40 MHz bandwidth in 2.4 GHz band
- 1T1R mode with data rate up to 150 Mbps
- Wi-Fi Multimedia (WMM)
- TX/RX A-MPDU, TX/RX A-MSDU
- Immediate Block ACK
- Fragmentation and defragmentation
- Automatic Beacon monitoring (hardware TSF)
- 4×virtual Wi-Fi interfaces
- Simultaneous support for Infrastructure BSS in Station, SoftAP, or Station + SoftAP modes Note that when ESP32-S3 scans in Station mode, the SoftAP channel will change along with the Station channel
- Antenna diversity
- 802.11mc FTM
Bluetooth
- Bluetooth LE: Bluetooth 5, Bluetooth mesh
- High power mode (20 dBm)
- Speed: 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps
- Advertising extensions
- Multiple advertisement sets
- Channel selection algorithm #2
- Internal co-existence mechanism between Wi-Fi and Bluetooth to share the same antenna
Advanced Peripheral Interfaces
- 45×programmable GPIOs
- Digital interfaces:
- 4×SPI
- 1×LCDinterface (8-bit ~16-bit parallel RGB, I8080 and MOTO6800), supporting conversion between RGB565, YUV422, YUV420 and YUV411
- 1×DVP8-bit ~16-bit camera interface
- 3×UART
- 2×I2C
- 2×I2S
- 1×RMT(TX/RX)
- 1×pulse counter
- LED PWM controller, up to 8 channels
- 1×full-speed USB OTG
- 1×USB Serial/JTAG controller
- 2×MCPWM
- 1×SDIO host controller with 2 slots
- General DMA controller (GDMA), with 5 transmit channels and 5 receive channels
- 1×TWAI® controller, compatible with ISO 11898-1 (CAN Specification 2.0)
- Analog interfaces
- 2×12-bit SAR ADCs, up to 20 channels
- 1×temperature sensor
- 14×touch sensing IOs
- Timers
- 4×54-bit general-purpose timers
- 1×52-bit system timer
- 3×watchdog timers
Low Power Management
- Power Management Unit with five power modes
- Ultra-Low-Power (ULP) coprocessors:
- ULP-RISC-V coprocessor
- ULP-FSM coprocessor
Security
- Secure boot
- Flash encryption
- 4-Kbit OTP, up to 1792 bits for users
- Cryptographic hardware acceleration:
- AES-128/256 (FIPS PUB 197)
- Hash (FIPS PUB 180-4)
- RSA
- Random Number Generator (RNG)
- HMAC
- Digital signature
SHIPPING LIST
- 1x WiFi Bluetooth Module ESP32-S2 4MB Flash 2MB PSRAM